Deck Mount
There are three deck mount options depending on your boat's pontoon and deck configuration. Adapter plate installation is simple and fast. All instructions and hardware are included.
Short-Short 8" aft-6" drop
Used when the edge of the deck extends past the end of the pontoon by at least 10 inches.
Short-Long 8" aft-11" drop
Used when the edge of the deck is approximately even with the end of the pontoon.
Long-Long 13" aft-11" drop
Used when the end of the pontoon protrudes past the end of the deck by no more than 6 inches.
Pontoon Mount
There are four pontoon brace mounting options depending on your boat's pontoon configuration. Adapter plate installation is simple and fast. All installation instructions and hardware are included.
13-14.5" Face
Used to mount the adapter plate to the support between the pontoon and the deck. The width of the pontoon support M-Brace should measure between 13 and 14.5 inches.
14.5-16" Face
Used to mount the adapter plate to the support between the pontoon and the deck. The width of the pontoon support M-Brace should measure between 14.5 and 16 inches.
16-17.5" Face
Used to mount the adapter plate to the support between the pontoon and the deck. The width of the pontoon support M-Brace should measure between 16 and 17.5 inches.
17.5-19" Face
Used to mount the adapter plate to the support between the pontoon and the deck. The width of the pontoon support M-Brace should measure between 17.5 and 19 inches.